HS-1 Light
Fischbach One Station Filler HS-1 Light: Fully automatic filling, plunger insertion and marking of up to 28 cartridges per minute.
Features
-
Processing plastic, aluminium or cardboard cartridges with or without nozzle.
-
Cartridges fed from ground-level magazine holding 500 standard cartridges.
-
Fast operating speed with high precision due to a dirt resistant and easy-to-clean, servo controlled chain conveyor.
-
Filling station with sled system for uninterrupted processing of thin-walled or slightly oval cartridges.
-
Precise, pneumatically driven volume dosing system guarantees +/- 0.5g dosing accuracy per cartridge at various viscosities.
-
Optimized, dome-shaped material cut-off guarantees air free plunger insertion.
-
Plunger insertion can be operated with or without a wire venting system. Sensors are positioned to check plunger insertion, plunger position, over and under travel of the plunger.
-
All workstations and machine units are easily accessible. One-piece sliding doors at the front and at the backside of the machine allow cleaning and maintenance to be fast and easy.
-
All workstations and machine functions are easily accessible. One-piece sliding doors at the front and at the back of the machine allow cleaning and maintenance to be fast and easy.
-
Advanced technology operator interface gives fast and easy access to all machine functions.
-
Superior safety devises in compliance with European CE Standard.
Technical Data
Type of Machine:
Cartridge Filling machine HS – 1 Light
Output:
28 cartridges per minute at 310 ml depending on the viscosity of the material filled
Dosing:
pneumatic
Dosing Range:
240 ml to 350 ml
Connecting height at Product Infeed:
1000 mm
Voltage:
EU 3 x 400 V / 50 Hz, USA 3x 480 V / 60 Hz or as requested
Control:
SPS / Siemens S7 – 1200
Power:
3 KW / 12 Ampere
Air Pressure:
6 bar minimum (87 psi)
Weight:
1.000 kg
